Laser welding is one of the important aspects of laser material processing technology. The welding process belongs to the heat conduction type, the laser radiation heats the workpiece surface, and the heat on the surface diffuses through the heat transfer guide. By controlling the width, energy, peak power and repetition frequency of laser pulse, the workpiece is melted to form a specific molten pool.
Laser welding is a new type of welding method. Laser welding mainly aims at the welding of thin-walled materials and precision parts, which can realize spot welding, butt welding, stack welding, seal welding, etc.
| Laser source | RAYCUS/RECI/IPG |
| Laser power | 1000W/1500W/2000W |
| Laser incidence | Coaxial |
| Laser Wavelength | 1080 |
| Collimated focal length | 50mm |
| Pulse Width | 0.5~10ms |
| Single Pulse Energy | 300J |
| Focal Spot Diameter | 0.2 ~ 2.0 mm |
| Focusing focal length | 100mm |
| Operating Voltage | AC220V 50Hz |
| Cross Power | ≤5000W |
| Gas Source | 0.2Mpa(Argon,Nitrogen) |
| Cooling Style | Water cooling |
| Handle | Aluminum hand-held,light and easy to master |
| Weave length | 1080nm±5 |
| Power stability | ±1.5% |
| Laser repetition frequency | 50-50,000Hz |
| Beam quality | ㎡≤1.3 |
| Red light indicates output power | 0.1-1mW |
| Output cable length | 10m |
| Operating Mode | continuously |
| Interface Type | QBH |
1. It can weld some other components that are easy to be damaged or cracked during welding without contact and will not cause mechanical stress to the welding object
2. It can irradiate the narrow parts that cannot be accessed by the soldering iron head on the circuit with dense components and change the angle when there is no distance between adjacent components in dense assembly, without heating the whole circuit board
3. During welding, only the welded area is heated locally, and other non welded areas are not subject to thermal effect
4. The welding time is short, the efficiency is high, and the solder joint will not form a thick intermetallic layer, so the quality is reliable
5. High maintainability. The traditional electric soldering iron welding needs to replace the soldering iron head regularly, while the laser welding needs to replace very few accessories, so the maintenance cost can be reduced
The custom welding head is designed with the body engineering design method, fully considering the comfort of the customer for long-term use, and has the protective measures of the butt welding material to prevent the customer from accidentally injuring others, It is easy to install with drawer type protective lens, and it is convenient for customers to carry out maintenance. At the same time, nozzles with different angles can be configured to meet the needs of customers to weld different products.
Automatic wire feeder, it is Industrial design digital panel, easy to use and operate powerful and compact auto feeding high efficiency
Different brand MAX/Raycus/Reci/IPG and different watts 1000W/1500W/2000W for choose